Acu-Spray Stick in a Pot

Drippers, Sprayers and Sprinklers

1. Drippers and Sprayers can be attached directly to 1/2" tubing by punching holes with a punch.
2. Drippers should be inserted with a tool. If a mistake is made or drippers need to be relocated, holes can be sealed with a goof plug.
3. Drippers and Sprayers can be attached directly to a 1/2" sprinkler riser by using an adapter.
4. To direct water away from 1/2" tubing to individual plants, attach porting tubing onto Dripper outlet and cut to desired length. The ends of porting tubing should have bug plugs for protection and stakes may be used.
5. Sprayers can be attached to1/2" tubing with a riser. For greater reach and flexibility, Sprayers can be attached to ends of Tubing and supported by S-6 Support Stakes. A connector is used to connect the different sizes of tubing.
6. Spray sticks can be attached to 1/2" tubing by punching hole with tool and inserting connector and porting tubing. Water can be shut off by reversing spray stick and using it as a plug.
7. After all Drippers and sprayers have been installed, flush the line(s) once more by removing end closures with water running to be sure all debris is out of the system. Check the tubing for any kinks that may restrict water flow and straighten if necessary.
8. You can now enjoy your Micro Irrigation watering system. If you discover further adjustments are needed, the system is designed for easy addition or removal of lines, drippers and fittings.